KINGrinder | Friendly Cleaning | Interior Adjustment

Clean your grinder and keep the fines residual away. I personally find inner peace when cleaning the grinder. 

The interior adjustment design is the easiest model to take apart throughout cleaning.  

The grinder’s component parts of the interior adjustment design.

Disassembling your grinder:

1. Remove the receiver. Hold the handle to prevent rotation.

2. Rotate the spin dial anti-clockwise to remove it as well as the numerical dial and the inner burr.

3. Remove the spring and the bearing cover.

4. Take out the handle and the black O-ring.

5. Pinch one side of the white O-Ring to remove, take out the PC lid and the ball.

Assembling your grinder:

1. Put on the PC Lid, the white O-Ring and the ball.

2. Put on the black O-Ring into the handle. Holding and connecting the handle with the grinder.

3. Put on the components in order. The bearing cover and the spring.

4. Install the inner burr and the numerical dial.

5. Rotate the spin dial clockwise.